Electric arc furnace steelmaking is to generate an arc between the graphite electrode and the loaded scrap steel. The heat source of the arc dissolves the scrap steel, oxidizes and removes impurities in molten steel, adjusts the composition, and then produces steel. Graphite electrodes are essential in the process of eaf steelmaking.
Table of Contents
토글흑연 전극 소비량
용광로 구조, 작동, AC/DC 모드, 흑연 전극 품질은 전극 소비량에 직접적인 영향을 미칩니다. 일반적으로 생산 시 철강 1톤당 전극 소비량은 1~4kg입니다.
We found that the consumption of graphite electrodes for eaf steelmaking usually includes end consumption, side consumption, and loss. End loss is mainly due to sublimation and slag erosion caused by high-temperature arc heat at the end.
예를 들어, AC 초고압 운전 정제 공정에서는 고전류로 인한 단자 소비가 증가하여 전체 소비의 50%를 차지합니다. 최근 적용된 대규모 직류 전기로에서는 고전류를 사용하면서 전극의 직경도 그에 따라 증가하기 때문에 열 충격으로 인한 최종 손실이 주요 소비가됩니다.
흑연 전극 바이스 소비
부수적인 소비, 그리고 산화 소비량는 AC 전기로 총 소비량의 50%를 차지합니다. 단말기 소비와 달리 정전 시에도 단말기 소비가 발생합니다.
이 소비량은 전극 표면 온도, 용광로 표면적, 가스 조성 및 유량에 따라 달라집니다. 철강 제조 시간. 일반적으로 전극의 부피 밀도를 높여 전극을 조밀하게 만들면 산화 소비를 줄일 수 있습니다.
Graphite electrode for eaf steelmaking damage consumption
손상 소비는 앞의 두 소비와 다른 비정상적인 소비로 전극 사고에 속합니다. 단선 사고에는 전극 구멍에서의 단선, 커넥터 단선, 본체 단선 등이 있습니다. 느슨한 트립과 함께 끝 부분의 균열 확장으로 인한 차단 재료 손실은 일반적으로 0-10%를 차지합니다.
After the graphite electrode for eaf steelmaking is energized, it will vibrate violently due to electromagnetic force and other reasons. At this time, if an external pressure exceeding the strength of the electrode is applied to generate thermal stress, the connection wire under the electrode’s main handle will break, significantly reducing production efficiency and increasing electrode consumption. You should avoid it as much as possible.
흑연 전극의 특성
소비를 줄이는 구체적인 방법
포함
The consumption in EAF steelmaking includes average consumption, such as arc light consumption, chemical consumption, and oxidation consumption; abnormal consumption, such as mechanical electrode breakage, common tripping, severe oxidation in the buckle, and expansion of the nipple will cause the electrode to burst, etc. The factory can avoid these situations in production.
The quality of graphite electrodes is critical to the EAF steelmaking process. Poor-quality products can prevent the electric arc from becoming unstable, resulting in incomplete steel melting and decreased productivity. Resistivity, bulk density, mechanical strength, and nipple quality are all related to consumption. Therefore, it’s essential to ensure that the products are of the highest possible quality.